The chefman electric kettle is comfortable and easy to use. Add water, and you’ll have tea, ready-to-eat soups, recipes, and boiling water for cleansing in just a few minutes. The kettle has a drain, which is more convenient than a microwave oven. However, like other small devices, some cleaning must keep the inside and outside in top condition. Removing mineral deposits, bacteria and mold are essential for tasty hot water.
The accumulation of minerals in the kettle from water is called kettle calcification. It tastes as bad as it looks. Fortunately, there are several items in the pantry, so cleaning is easy.
How often clean an electric glass kettle?
The frequency of cleaning depends on how often you use the kettle. Wipe at least once a week to remove dirt and splashes. If used to heat water daily, the kettle should be scaled down to remove hard water minerals at least four times a year. If your kettle has a water filter or cartridge, it should be cleaned every two months or recommended by the manufacturer.
What you’ll need to clean the inside of a tea kettle
Equipment / Tools
- A non-abrasive sponge or bottle brush
- Microfiber cloth
Materials
- Distilled white vinegar, lemon juice, or citric acid powder
- Baking soda
- Dishwashing liquid
Purify the kettle from lime with vinegar
Put a 1: 1 solution of water and distilled white vinegar in about half of the kettle. Bring the solution to a boil. If it doesn’t turn off automatically, turn off the kettle. Leave the vinegar solution for at least 20 minutes. Discard the cleaning solution.
Purify the kettle from lime with lemon juice or citric acid powder
Instead of distilled white vinegar, you can use freshly squeezed or bottled lemon juice or citric acid powder. Mix 1: 1 lemon juice and water, or use two tablespoons of citric acid powder in a half-filled kettle to bring the solution to a boil. Turn off the kettle and leave it for at least 20 minutes before discarding the solution.
Unplug and remove the kettle
Unplug the chilled kettle before further cleaning. If you have a water filter, remove it before cleaning the inside of the kettle.
Cleaning or replacing the water filter
If your model has a water filter or water filter cartridge, follow the manufacturer’s instructions to clean the removed filter. Most filters are made of metal and can be cleaned by immersing them in a solution of hot water and distilled white vinegar for at least 5 minutes. Rub with a brush and rinse with fresh water.
Polish the inside of the kettle
Use a non-abrasive sponge or soft bristle brush to scrub the inside of the kettle. This slows down the accumulation of minerals remaining inside. Pay particular attention to areas with a lot of mineral deposits around the nipple. Soaking a brush or sponge in pure vinegar will help remove debris around the faucet.
Clean the outside of the kettle
Wipe the kettle outside with a non-abrasive sponge soaked in warm water and a few drops of dish soap solution to remove dirt and splashes. If the ground is hard to remove, soak a damp sponge in baking soda. The gentle abrasiveness of baking soda helps to remove dirt. After cleaning the exterior, dry the kettle with a microfiber cloth to prevent scratches.
Reassemble the kettle and do the final rinse
After cleaning the kettle, reassemble all components and fill half of the kettle with water for a final rinse. Insert the plug and bring the water to a boil ultimately. Discard the water.
Repeat the “rinse cycle” again to make sure all cleaning fluids and free minerals are gone.
Chefman Electric Kettle: How do I install it?
It comes with an instruction manual, but it’s easy to install without this electric kettle. Remove the new kettle from the box, clean it, fill it and press the start button.
It comes with a kyusu so that you can brew tea with a kettle. Put tea leaves in the kyusu, and when the water becomes a kyusu, put it in the kyusu. The user manual also comes with a guide on the temperature and sudden times required for a particular tea type, and a good knob ensures perfect timing.
Tips to remove scale from an electric kettle for longer
- Do not leave water in the kettle. All you have to do is learn how to heat the amount of water you think you will need each time you use it. Be sure to drain all water each time you use the kettle. (Water the plants or rinse the sink with the remaining water.)
- Use distilled water instead of tap water. This is especially important if you live in an area with hard water or use natural wells for water supply.
What kind of maintenance is required to clean an electric glass kettle?
To keep your electric kettle in top condition, you need to keep it clean. You can clean the tea injector by washing it with warm soapy water and rinsing it well.
You can also remove the unit’s filter, move it under hot water, and rub it with a clean cloth or brush to clean it. Be sure to dry it thoroughly before using it again.
Finally, the kettle can be scaled down using a commercially available descaler or, if necessary, boiling the vinegar in a pan to remove all debris. Then you need to rinse the kettle with water to remove the vinegar altogether. Do not immerse the kettle or base in water. It will be completely ruined, and the warranty will be voided.
